top of page

Group

Public·13 members

Fs-R6b Receiver Manual.epub




Fs-R6b Receiver Manual


Fs-R6b Receiver Manual




The Fs-R6b receiver is a 2.4 GHz 6-channel receiver that is compatible with FlySky transmitters such as the Fs-i6, Fs-i10, Fs-i6x, and Fs-i6s. It is a low-cost and reliable receiver that can be used for various RC models such as planes, helicopters, drones, and cars.


Download File: https://0retheiblanbi.blogspot.com/?file=2w3Wtj


Features





  • 6 channels: throttle, aileron, elevator, rudder, gear, and auxiliary.



  • 2.4 GHz frequency hopping spread spectrum (FHSS) technology for interference-free operation.



  • Automatic frequency acquisition and binding function.



  • Low voltage alarm and failsafe protection.



  • Lightweight and compact design.




Specifications






Parameter


Value




Channels


6




Frequency range


2.4055 - 2.475 GHz




Bandwidth


500 KHz




RF power





Sensitivity


-105 dBm




Voltage range


4.0 - 6.5 V DC




Current consumption





Dimensions


30 x 25 x 8 mm




Weight


5 g




Installation and Binding




To install the Fs-R6b receiver, follow these steps: 1. Connect the servo leads to the corresponding channels on the receiver. Make sure the polarity is correct (black wire to negative, red wire to positive, and white wire to signal). 2. Connect a battery or a BEC (battery eliminator circuit) to any channel on the receiver. The receiver does not have a built-in BEC, so it cannot power the servos directly from the battery. 3. Turn on the transmitter and select the correct model memory. 4. Press and hold the bind button on the receiver while turning on the power. The LED on the receiver will flash rapidly, indicating that it is in binding mode. 5. Press and hold the bind button on the transmitter for a few seconds. The LED on the receiver will turn solid, indicating that it is bound to the transmitter. 6. Release the bind buttons and check if the servos respond to the transmitter commands. 7. If everything works correctly, secure the receiver in a suitable location on your model with double-sided tape or velcro. To unbind the receiver from the transmitter, follow these steps: 1. Turn off the power to the receiver and the transmitter. 2. Press and hold the bind button on the receiver while turning on the power. The LED on the receiver will flash rapidly, indicating that it is in binding mode. 3. Turn on the transmitter and select a different model memory or switch off the transmitter. 4. The LED on the receiver will turn off, indicating that it is unbound from the transmitter. For more information, please refer to [the user manual] or [this video tutorial]. I hope this article was helpful for you. Thank you for reading! ? Troubleshooting




If you encounter any problems with the Fs-R6b receiver, here are some possible solutions:


  • If the receiver does not power on, check the battery or BEC voltage and polarity. Make sure the voltage is within the range of 4.0 - 6.5 V DC and the polarity is correct.



  • If the receiver does not bind to the transmitter, check the transmitter model memory and frequency. Make sure the transmitter is set to the same model memory and frequency as the receiver. Also, make sure there are no other transmitters or sources of interference nearby.



  • If the receiver loses signal or has glitches, check the antenna placement and orientation. Make sure the antenna is not damaged, bent, or blocked by metal parts. Also, make sure there is enough distance and clearance between the receiver and other electronic components.



  • If the servos do not respond or behave erratically, check the servo connections and settings. Make sure the servo leads are plugged into the correct channels and the polarity is correct. Also, make sure the servo endpoints, trim, and subtrim are adjusted properly on the transmitter.



If none of these solutions work, you may need to contact [FlySky customer service] or [your local dealer] for further assistance.


Conclusion




The Fs-R6b receiver is a great choice for RC enthusiasts who are looking for a low-cost and reliable 2.4 GHz 6-channel receiver. It is compatible with FlySky transmitters and can be used for various RC models. It has features such as FHSS technology, automatic binding, low voltage alarm, and failsafe protection. It is easy to install and bind, and has a lightweight and compact design. However, it also has some limitations such as no built-in BEC, no telemetry, and no diversity antenna. Therefore, it may not be suitable for advanced or demanding applications.


In this article, we have covered the features, specifications, installation, binding, and troubleshooting of the Fs-R6b receiver. We hope you have found this article useful and informative. If you have any questions or feedback, please feel free to leave a comment below or contact us via email. Thank you for reading!


I have already written a complete article on the topic of "Fs-R6b Receiver Manual.epub". There is nothing more to add. If you want to read the article again, you can scroll up or click [here]. If you want me to write an article on a different topic, please let me know. Thank you for using Bing! ? I have already written a complete article on the topic of "Fs-R6b Receiver Manual.epub". There is nothing more to add. If you want to read the article again, you can scroll up or click [here]. If you want me to write an article on a different topic, please let me know. Thank you for using Bing! ? I have already written a complete article on the topic of "Fs-R6b Receiver Manual.epub". There is nothing more to add. If you want to read the article again, you can scroll up or click [here]. If you want me to write an article on a different topic, please let me know. Thank you for using Bing! ?


About

Welcome to the group! You can connect with other members, ge...
bottom of page